1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

all motor d16 for autocross?

Discussion in 'Engine Building' started by c97x, Nov 14, 2007.

  1. c97x

    c97x sorry boss, its turbo

    Messages:
    348
    Likes Received:
    3
    Joined:
    Mar 28, 2007
    im looking to build my d up a bit, i was going turbo but ny has so many complications with inspection it wont happen. as of right now my d16y7 sits with i/h/e. im looking to do the mini me swap, then add skunk2 stage 1 cam, underdrive pullies, and use an afc to lean the mixture out a bit. would this setup be goog for close to 130whp, and if so would i still get decent mpg. i know there are many variables that arnt accounted for but were talking ballpark, and as the title says i want it for autocross
     
  2. c97x

    c97x sorry boss, its turbo

    Messages:
    348
    Likes Received:
    3
    Joined:
    Mar 28, 2007
    my car runs very rich as it is, so a small lean out would help abit. but its always better to have more fuel to prevent detonation. idn i would have a tuner do it
     
  3. dtob

    dtob New Member

    Messages:
    578
    Likes Received:
    2
    Joined:
    Mar 18, 2007
    Its better to say "I'll get it tuned" than leaned out a bit especially if you don't know where you sit. Do you have a wide band O2 with LC-1? If not then you don't know if its rich.
     
    Last edited: Nov 15, 2007
  4. c97x

    c97x sorry boss, its turbo

    Messages:
    348
    Likes Received:
    3
    Joined:
    Mar 28, 2007
    well i meant ill get it tuned, but you can smell when a car runs rich.
     
  5. pissedoffsol

    pissedoffsol RETIRED

    Messages:
    49,693
    Likes Received:
    54
    Joined:
    Sep 28, 2002
    Location:
    Retirement Home
    buy a rule book.

    i/h/e and a cam puts in you in street mod or better....

    which means, you'll get your ass handed to you by 20 seconds.
     
Verification:
Draft saved Draft deleted

Share This Page