1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Anybody know how to upload software to a Dynameter?

Discussion in 'ECU's, Electronics, and Tuning' started by EF9_boy, Aug 19, 2010.

  1. EF9_boy

    EF9_boy New Member

    Messages:
    323
    Likes Received:
    2
    Joined:
    Sep 23, 2008
    Location:
    TX
    I'm a student at Texas State Technical College in Sweetwater Tx. TSTC has a dynameter that is rarely used, the instructors there know how to operate it, but dont know how to upload new software so they dont use it. After a ton of begging I finaly convinced one of the instructors that if i could upload the tuning software to the dynameter he would tune my car, and if he had enough time possibly teach me how to use the dynameter. I was hoping that someone could explain how to upload the software. It is a Mustang dynameter(i know, not the best in the world but its better than nothing), and the tuning software I wanted to use is Hondata.
     
  2. EF9_boy

    EF9_boy New Member

    Messages:
    323
    Likes Received:
    2
    Joined:
    Sep 23, 2008
    Location:
    TX
    I got it figured out now thanks to Tony Palo @ T1 Race Development

    but any tuning tricks that ya'll know of would also be useful
     
  3. phunky.buddha

    phunky.buddha Admin with a big stick Admin VIP

    Messages:
    28,465
    Likes Received:
    228
    Joined:
    Sep 30, 2002
    Location:
    Dallas / Fort Worth, TX
    Look up EFI 101. There are WAY too many variables to just jump in blind.
     
  4. EF9_boy

    EF9_boy New Member

    Messages:
    323
    Likes Received:
    2
    Joined:
    Sep 23, 2008
    Location:
    TX
    will do thank ya sir :thumbsup:
     
Verification:
Draft saved Draft deleted

Share This Page