1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

auto ecu converted to manual

Discussion in 'ECU's, Electronics, and Tuning' started by trollacoaster, Mar 28, 2005.

  1. trollacoaster

    trollacoaster Junior Member

    Messages:
    8
    Likes Received:
    0
    Joined:
    Sep 4, 2004
    I found somewhere a diagram and a picture of the soldernig tat needs to be done to convert the ecu (p08) to a manual....could someone point me in the direction?
     
  2. nfn15037

    nfn15037 Senior Member

    Messages:
    670
    Likes Received:
    0
    Joined:
    Mar 1, 2004
    www.pgmfi.org in the library under hardware mods.
     
  3. trollacoaster

    trollacoaster Junior Member

    Messages:
    8
    Likes Received:
    0
    Joined:
    Sep 4, 2004
    the picture they show is a p28, I have a p08. They mention talking out the rp17 and rp18, I don't even have that...
    [​IMG]

    this is what I have you're supposed to have jumper named RP....
     
Verification:
Draft saved Draft deleted

Share This Page