1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

AVC-R Wiring

Discussion in 'Forced Induction' started by kamaleon, Dec 29, 2003.

  1. kamaleon

    kamaleon Junior Member

    Messages:
    11
    Likes Received:
    0
    Joined:
    Nov 27, 2002
    Does anyone got a more detail wiring to install all the wires?
    Per apexi's manual:

    Red: 12v
    Purple: RPM
    Green: Ground
    Black: Ground
    Grey: Throttle
    White: Speed signal

    but still no mention for wires with color:
    yellow, orange, brown, pink and blue.

    need to know which wires are used to control the apexi boost solenoid.

    Its for a 96 civic
     
  2. pissedoffsol

    pissedoffsol RETIRED

    Messages:
    49,693
    Likes Received:
    53
    Joined:
    Sep 28, 2002
    Location:
    Retirement Home
    [​IMG]


    :D


    but seriosuly, its all there man.. i think you need to look at the manual again... or get the pdf from apexi-usa.com
     
  3. Joseph Davis

    Joseph Davis Member

    Messages:
    35
    Likes Received:
    0
    Joined:
    Dec 7, 2003
    Sounds like the guy has an AVC-R without the harness. If you have the harness, it has pigtails with plugs that plug directly into the Apexi solenoid AND the transducer (glorified MAP sensor) - no woring of said pieces required.

    I have a spare harness for one somewhere, but you're SOL on the transducer if you lack one... should be a few $$$ to pick up.
     
Verification:
Draft saved Draft deleted

Share This Page