1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

axles for b18/hf swap

Discussion in 'HYBRID -> ED-EF / DA' started by lilboostedcrx, Jul 25, 2003.

  1. lilboostedcrx

    lilboostedcrx Junior Member

    Messages:
    10
    Likes Received:
    0
    Joined:
    Jul 19, 2003
    I've got a lil bit of a prob i understand and noe that the stock hf hub will not fit integra axles but i was wondering if it was okay or possible to run with the stock hf axles and if not then how much do the si/dx hubs usually cost
     
  2. Slo86GT

    Slo86GT Super Moderator

    Messages:
    3,354
    Likes Received:
    0
    Joined:
    Sep 29, 2002
    Location:
    Memphis - Hellhole of the South
    You can get the hubs with brakes for $100-$200 at most junkyards. Don't even try to make a custom axle with the HF crap. ;)
     
  3. SleEPeR_CRX

    SleEPeR_CRX Senior Member

    Messages:
    1,226
    Likes Received:
    0
    Joined:
    Dec 22, 2002
    Location:
    Vancouver B.C. canada
    i got my extra Si hub at a wrecker for $25 canadian. my CV shaft was like welded into the hub and not even a 12 lb sledge could get it out ;) get Si/DX hubs they will work.
     
  4. hcivic.com

    hcivic.com Senior Member

    Messages:
    4,571
    Likes Received:
    2
    Joined:
    Jan 7, 2003
    Location:
    Calgary Alberta canada
    you can make a custom axel. All the hf parts on the thing are the outside socket, the rest including the shaft and joints a tegra it is easy to do, The proces can be found in most manuals under the rebiuld section all you do is swap out the parts need to make a hybrid axel.
     
Verification:
Draft saved Draft deleted

Share This Page