unsivil_audio
Ninja's pwn samuri's.
B-SERIES TURBO KIT - B16 B18 B20
* Brand new XS Power T3/t04e 57trim .50/.63 a/r
* Tial style 38mm wastegate
* Brand new, never used, SSauto Ramhorn
* Real turboXS mbc
* 2.5" IC piping with couplers and T-bolt clamps
* 25x7x2.5 FMIC
* HKS style SSQV BOV - Great sound!
* 5 bolt 2.25" downpipe with flex section and o2 bung
* Blue top DSM 450cc injectors
* Adjustable FPR with Gauge and matching b-series fuel rail
* Stainless steel braided OIl feed with brass tee, Rubber return line
* B-series Tapped oil pan
* B-series Vision Adjustable Cam gears
* Motorola 2.5 bar map sensor
* Brand new Voodoo Vacuum manifold with fittings
*AEM UEGO wb guage
*OBD1 Vtec wiring harness with resistors for DSM injectors
Take the hassle out of piecing together your own kit. I had
this installed (minus the turbo, was running a garrett) on my own personal
vehicle, b16 eg hatch. Its a good kit. Have no worries about the quality of an
XSpower turbo, the last one I used had over 20k miles on it and still pulled
very strong.
The only things you'll need to run this kit is used, is a boost
guage, resistor box for the injectors, and a chipped ecu or SAFC/VAFC to control
the injectors.
Any questions feel free to ask.
I'll let it all go for $1000 Shipped
Paypal accepted and preferred.
* Brand new XS Power T3/t04e 57trim .50/.63 a/r
* Tial style 38mm wastegate
* Brand new, never used, SSauto Ramhorn
* Real turboXS mbc
* 2.5" IC piping with couplers and T-bolt clamps
* 25x7x2.5 FMIC
* HKS style SSQV BOV - Great sound!
* 5 bolt 2.25" downpipe with flex section and o2 bung
* Blue top DSM 450cc injectors
* Adjustable FPR with Gauge and matching b-series fuel rail
* Stainless steel braided OIl feed with brass tee, Rubber return line
* B-series Tapped oil pan
* B-series Vision Adjustable Cam gears
* Motorola 2.5 bar map sensor
* Brand new Voodoo Vacuum manifold with fittings
*AEM UEGO wb guage
*OBD1 Vtec wiring harness with resistors for DSM injectors
Take the hassle out of piecing together your own kit. I had
this installed (minus the turbo, was running a garrett) on my own personal
vehicle, b16 eg hatch. Its a good kit. Have no worries about the quality of an
XSpower turbo, the last one I used had over 20k miles on it and still pulled
very strong.
The only things you'll need to run this kit is used, is a boost
guage, resistor box for the injectors, and a chipped ecu or SAFC/VAFC to control
the injectors.
Any questions feel free to ask.
I'll let it all go for $1000 Shipped
Paypal accepted and preferred.
Last edited:
