1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

b16 crx ..odd bogging at mid throttle gurus help!!

Discussion in 'HYBRID -> ED-EF / DA' started by goldgreen90ef, Apr 2, 2007.

  1. goldgreen90ef

    goldgreen90ef goldgeen90ef

    Messages:
    642
    Likes Received:
    4
    Joined:
    Aug 19, 2006
    Location:
    cold ohio
    i got a91 si w a jdm b16 swap with a jdm ecu..i have a very inetrmitente problem with a slight bog at lower rmps, when the cars warm. it has a full tune up (capwireSrotorlpugs) and i regapped the plugs and it seemed to help, but then it came back.. my one good guess is that im running the jdm ecu with only one wire..but it was not doing that before..the car ran fine .... thanks guys
     
  2. dbone_vtec

    dbone_vtec HONDA 4 LIFE

    Messages:
    208
    Likes Received:
    0
    Joined:
    Mar 30, 2007
    Location:
    MASS
    I've Had A Bad No.1 Cylinder Position Sensor (inside Dizzy)

    Give Me Low Rpm Sputters, But The Check Engine Light Told Me That;)

    I Replaced The Whole Dizz, And Felt Like New

    Try One Before You Buy One "d"
     
  3. freak86

    freak86 New Member

    Messages:
    287
    Likes Received:
    0
    Joined:
    Jul 28, 2006
    Location:
    Southwest Michigan
    Could be your oxygen sensors/o.s. wiring I believe. I've heard of that happening, but don't quote me on that.
     
  4. goldgreen90ef

    goldgreen90ef goldgeen90ef

    Messages:
    642
    Likes Received:
    4
    Joined:
    Aug 19, 2006
    Location:
    cold ohio
    you are correct... broken 2nd o2 wire..fixed todya thanks
     
  5. freak86

    freak86 New Member

    Messages:
    287
    Likes Received:
    0
    Joined:
    Jul 28, 2006
    Location:
    Southwest Michigan
    you're welcome. have fun.
     
  6. dbone_vtec

    dbone_vtec HONDA 4 LIFE

    Messages:
    208
    Likes Received:
    0
    Joined:
    Mar 30, 2007
    Location:
    MASS
    no shit

    good info

    thanks
     
  7. goldgreen90ef

    goldgreen90ef goldgeen90ef

    Messages:
    642
    Likes Received:
    4
    Joined:
    Aug 19, 2006
    Location:
    cold ohio
    nother thing...high flow fuel pumps become very finicky when gas starts to go low... thanks for all the help guys....
     
Verification:
Draft saved Draft deleted

Share This Page