1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

b16 head build questions

Discussion in 'HYBRID -> ED-EF / DA' started by skellagher, Mar 15, 2011.

  1. skellagher

    skellagher Elder Driver

    Messages:
    256
    Likes Received:
    1
    Joined:
    Oct 18, 2007
    Location:
    Newark, De
    ok im doing a full brian crower valve train and the stg 2 all motor cams i also got the improved lma's...

    when installing the lma's does the big end go down into the head?


    also i need to know what spark plugs i should use... currently have the iridium ngk b16 plugs in it.
     
  2. Jswike

    Jswike New Member

    Messages:
    50
    Likes Received:
    1
    Joined:
    Mar 7, 2009
    lma?
     
  3. skellagher

    skellagher Elder Driver

    Messages:
    256
    Likes Received:
    1
    Joined:
    Oct 18, 2007
    Location:
    Newark, De
    lost motion assembly
     
  4. btk2334

    btk2334 New Member

    Messages:
    20
    Likes Received:
    0
    Joined:
    Mar 19, 2010
    those plugs should be fine, and im not sure about the lma's i never changed mine but i would assume it would go in the same way it comes out? And are you upgrading fuel at all, i know the stock injectors are real close to full duty at the stock specs
     
  5. skellagher

    skellagher Elder Driver

    Messages:
    256
    Likes Received:
    1
    Joined:
    Oct 18, 2007
    Location:
    Newark, De
    yea i am going with h22 injectors.. they are like 340's or something and i have a walbro fuel pump. and the lma's were the hydraulic type now i have a improved spring ones.
     
Verification:
Draft saved Draft deleted

Share This Page