1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

b16 head on a gsr block

Discussion in 'Engine Building' started by 92Gsrhatch, Feb 22, 2004.

  1. 92Gsrhatch

    92Gsrhatch Member

    Messages:
    87
    Likes Received:
    0
    Joined:
    Jan 23, 2004
    Location:
    Virginia
    i wanna put type cams,pistons with the stock gsr crank...put a b16 head with some cams,and aftermarket internal stuff in the head............would this be worth it or just leave my gsr head on my block still put the typeR pistons,rods...and just throw a set of cams in that..whats the best/cheapest setup
     
  2. E_SolSi

    E_SolSi Member of the 20 nut club Moderator VIP

    Messages:
    30,026
    Likes Received:
    3,953
    Joined:
    Sep 28, 2002
    Location:
    CT
    you will have higher compression if you keep the GSR head
     
  3. ek_jeremy

    ek_jeremy Junior Member

    Messages:
    5
    Likes Received:
    0
    Joined:
    Feb 29, 2004
    just swap in b16 pistons then
     
Verification:
Draft saved Draft deleted

Share This Page