1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

b16 qeustions..**LOOK

Discussion in 'Civic and del Sol - EG and EK' started by NOrice1HNDA, Feb 23, 2008.

  1. NOrice1HNDA

    NOrice1HNDA Banned

    Messages:
    37
    Likes Received:
    0
    Joined:
    Feb 23, 2008
    ok i have a few qeustions.. the car is a 94 eg, If i buy just the b16 motor.. where could i get/wat harness do i use for it. an howmuch do u think i would spend on tranny/linkage/motor mounts.....
    I was thinking just going to the junk yard an taking a b18 tranny,axle's an linkage out of an older integra.. would this work?
    Or would it be cheaper going with a FULL change over...?


    -Anyone know any cheap/er sites to find B series engines please list it when u post here.... thank you.
     
    Last edited: Feb 24, 2008
  2. OKCZombie

    OKCZombie Banned

    Messages:
    124
    Likes Received:
    0
    Joined:
    Jan 10, 2008
    swap and just the motor do not go together for one....what harness in general depends on what your car is. No harness conversion? easiest way prob go through passwordjdm.com or hmotorsonline.com or somewhere reputable. get the jdm swap complete with everything you need. toronto jdm on here in classifieds has theirs reasonable as well and price just depends I cant quote ya one...but be prepared when all said and done to spend 2 grand easily if not close to 3
     
  3. George777

    George777 ^^ Likes Bewbies

    Messages:
    2,917
    Likes Received:
    61
    Joined:
    Aug 17, 2005
    Location:
    With your mom
    hmotorsonline has it for I think $1500...that's what I was going to do in my hatch until I decided to do ls/vtec...$800 more was the only difference...
     
  4. NOrice1HNDA

    NOrice1HNDA Banned

    Messages:
    37
    Likes Received:
    0
    Joined:
    Feb 23, 2008
    *****

    EG coupe. dx. d15b swap in it right now.
     
  5. NOrice1HNDA

    NOrice1HNDA Banned

    Messages:
    37
    Likes Received:
    0
    Joined:
    Feb 23, 2008
    Any other answers?..... anyone kno any other places to get swaps...

    AND could i use a JDM D15B harness.. if so wat changes would i have to make to it...
     
    Last edited: Feb 24, 2008
  6. YBLEGAL

    YBLEGAL Regular Member w/ Cheese

    Messages:
    2,762
    Likes Received:
    36
    Joined:
    Aug 9, 2006
    Location:
    NW Indiana
  7. NOrice1HNDA

    NOrice1HNDA Banned

    Messages:
    37
    Likes Received:
    0
    Joined:
    Feb 23, 2008
    yaya funny but i like to have my qeustions answerd as asked. makes it easyier ahaha.
    Rywire - Online Store

    if i use this is it tru i can use the D15B jdm motor harness with that an all the plugs will b the same..?

    still need to kno wat ecu's are usable for the b16's.... an where i could get one...
     
  8. ls/vtechatch91

    ls/vtechatch91 New Member

    Messages:
    339
    Likes Received:
    2
    Joined:
    Sep 16, 2006
    Location:
    washington
    okay u dont need to change harness.. just run the vtec wires from the ecu.. that simple... and if u get a 90-93 integra motor.. ur gonna need a different tranny... or unless u get the hyrdo to cable converssion kit...
     
  9. NOrice1HNDA

    NOrice1HNDA Banned

    Messages:
    37
    Likes Received:
    0
    Joined:
    Feb 23, 2008
    ok if i get the 92-95 from hmotors. would i be fine? an why would i need a diffrent tranny? pretty much where can u get a full swap thats under 2800
     
  10. j-salas

    j-salas New Member

    Messages:
    9
    Likes Received:
    0
    Joined:
    Feb 25, 2008
    Location:
    cen-cal
    a pretty good source is craigslist.org ive gotten alot of stuff for my car there . but if you wanna go with better quality you shoud try passwordjdm.com or jdmcarboy.com
     
  11. NOrice1HNDA

    NOrice1HNDA Banned

    Messages:
    37
    Likes Received:
    0
    Joined:
    Feb 23, 2008
  12. delsol88

    delsol88 Blinker Fluid Specialist

    Messages:
    251
    Likes Received:
    2
    Joined:
    Mar 27, 2007
    Location:
    JC,MO
  13. George777

    George777 ^^ Likes Bewbies

    Messages:
    2,917
    Likes Received:
    61
    Joined:
    Aug 17, 2005
    Location:
    With your mom
    Doesn't leave much for labor...Or last minute uh-oh's...
     
  14. NOrice1HNDA

    NOrice1HNDA Banned

    Messages:
    37
    Likes Received:
    0
    Joined:
    Feb 23, 2008
    im doing the full swap my self. its the benifit of knowing how to swap a motor. no 60$ an hour to watch a machanic play with him self an take twice as long as it will take me
     
  15. NOrice1HNDA

    NOrice1HNDA Banned

    Messages:
    37
    Likes Received:
    0
    Joined:
    Feb 23, 2008
    and plus why would i need those mounts...? thats the full change over.... plus 2200+300 for shipping plus 330 for engine mounts is wayy over wat im lookin to spend.. i have a d15b right now with high comp pistons. im ot lookin to spend 3 grand on 20 more hp...
     
  16. 93egg

    93egg New Member

    Messages:
    3
    Likes Received:
    0
    Joined:
    Feb 28, 2008
    umm... i got some fuze gauges how do you i got a air fuel ratio gauge and a volt gauge i need to find out how to hook them up i got them from a friend with no instrutions. HELP ME...
     
    Last edited: Mar 1, 2008
  17. NOrice1HNDA

    NOrice1HNDA Banned

    Messages:
    37
    Likes Received:
    0
    Joined:
    Feb 23, 2008
    that has nothing to do with b16 swaps.. an i have noo idea wat that is..
     
Verification:
Draft saved Draft deleted

Share This Page