1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

b16a crx

Discussion in 'HYBRID -> ED-EF / DA' started by 9inch, Aug 10, 2004.

  1. 9inch

    9inch Member

    Messages:
    70
    Likes Received:
    0
    Joined:
    Apr 12, 2004
    Location:
    Omaha, NE
    my crx has been running a little rough the last week or so. when i'm on the throttle in the lower gears just starting to pick up some speed 20-30 mph, it will bog down sometimes, almost like it wants to die. i'll have like no throttle response and almost come to a stand still. i then usually slam on the throttle and it comes to. what would be causing this problem? when i first bought the car, before the b16a swap, i had the same problem with the d16. although this has just occured in the last week or so with the new engine in. i personlly have only put about 200 miles on the motor sense it was installed. anyone out there that knows what is going on please help me out.
     
  2. hammerdgolfer

    hammerdgolfer Senior Member

    Messages:
    275
    Likes Received:
    0
    Joined:
    Nov 21, 2003
    make sure your throttle cable is all adjusted right and shit
     
  3. 9inch

    9inch Member

    Messages:
    70
    Likes Received:
    0
    Joined:
    Apr 12, 2004
    Location:
    Omaha, NE
    it might be the throttle cable because my buddy just used zip ties to hold it down. he was going to make a bracket to hold it in place. i might have to make him do that. thanx
     
  4. hammerdgolfer

    hammerdgolfer Senior Member

    Messages:
    275
    Likes Received:
    0
    Joined:
    Nov 21, 2003
    ok and check to make sure all the vacum hoses on the intak mani are connected
     
Verification:
Draft saved Draft deleted

Share This Page