1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

B16a Distributor

Discussion in 'HYBRID -> EG-EK / DC' started by deceptiveallmotor, May 1, 2003.

  1. deceptiveallmotor

    deceptiveallmotor Junior Member

    Messages:
    1
    Likes Received:
    0
    Joined:
    May 1, 2003
    so here's my confussion. I have a b18c head that needs a new distributor. I have found several for around three hundred but I also found two complete b16a's with distributor for cheap. these are both 1990 b16a's will there distributor work on my 94 b18c head?
     
  2. jason

    jason Junior Member

    Messages:
    8
    Likes Received:
    0
    Joined:
    Feb 22, 2003
    looks like u need a obd 1 distributor. 90 b16 came with a obd 0. they will bolt up, but the wiring wont match to your car. also u can also use a obd 1 LS distributor if u grind off one leg.
     
  3. nuc79

    nuc79 Senior Member

    Messages:
    164
    Likes Received:
    0
    Joined:
    Dec 4, 2002
    Location:
    SE Georgia (near Jacksonville, FL)
    you can take the guts out of any obd-1 dizzy and rebuild that gsr unit. I have a 93 LS distributor(front leg ground off) on a b16a. The bearing/bushing went out last week(started squealing), so I used good rotating assembly from a 94 H23A distributor. Not to mention the coil and ignitor are from a 93 civic Si. Talk about a frankenstein. But, hey, the dealer wants almost as much as what the B16 engine cost me ($500).

    Let me know if you want to sell the broken gsr distributor.
     
Verification:
Draft saved Draft deleted

Share This Page