1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

B16A Turbo Setup - Max power on stock crank ?

Discussion in 'Forced Induction' started by amadeuscr, Sep 6, 2010.

  1. amadeuscr

    amadeuscr Member

    Messages:
    172
    Likes Received:
    2
    Joined:
    May 13, 2007
    We're building the b16 again for a little more power lol .we are changing pretty much everything , oil pump , adding darton sleeves , cp pistons , acl race bearings , eagle rods , arp head studs , and we are planning to get at least 550whp . but I don't know if the crankshaft can hold the stress . what do you guys think ?

    Randall.
     
    Last edited: Sep 9, 2010
  2. Matts96HB

    Matts96HB . Moderator VIP

    Messages:
    6,482
    Likes Received:
    389
    Joined:
    Apr 16, 2006
    Youll be fine. I wouldnt expect the stock crank to present any problems until you get well into the 700+ range
     
  3. jeffie7

    jeffie7 Wrong Whole! VIP

    Messages:
    12,927
    Likes Received:
    730
    Joined:
    Sep 28, 2002
    Location:
    Maryland
    Crank shaft is fine, as with the stock cams.
     
Verification:
Draft saved Draft deleted

Share This Page