1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

b16a1 into 93 integra trouble

Discussion in 'HYBRID -> ED-EF / DA' started by Anthony soder, Jan 3, 2007.

  1. Anthony soder

    Anthony soder New Member

    Messages:
    2
    Likes Received:
    0
    Joined:
    Dec 31, 2006
    Location:
    A town, Alaska
    i have installed a b16a1 into my 93 integra. everythings good. but the problem is the wiring harness connectors are different that the plugs on the integra. to get the wires spliced together is gonna cost a good chunk of money. is there any other route i can go??
     
  2. 801CRX

    801CRX Got Rice?

    Messages:
    1,347
    Likes Received:
    12
    Joined:
    Dec 2, 2006
    Location:
    UTAH
    Wrong thread buddy, try the HYBRID -> ED-EF / DA forums and threads.
    Look and read before you post.
     
  3. xips(86CRXSI)

    xips(86CRXSI) New Member

    Messages:
    106
    Likes Received:
    0
    Joined:
    Aug 11, 2005
    Location:
    Portland, OR
    switch out the whole wiring harness. Have fun.
     
  4. Anthony soder

    Anthony soder New Member

    Messages:
    2
    Likes Received:
    0
    Joined:
    Dec 31, 2006
    Location:
    A town, Alaska
    Can anyonme direct me to the right place for information on how to switch out the wiring harness and where to buy them...

    Any adice will be greatly appreciated.

    Thanks in advance.
     
  5. Andrew

    Andrew Well-Known Member

    Messages:
    2,685
    Likes Received:
    26
    Joined:
    Mar 2, 2006
    Location:
    Tallahassee, FL
    No.You said that same thing in the other thread and it was shot down as well. you do not have to change the entire harness.

    Just use the stock Integra harness and wire in the 8 nessesary wires.(VTEC, Knock, IAT, o2)
    Rywire in my sig carries some handy harness'
     
Verification:
Draft saved Draft deleted

Share This Page