1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

b17 crank and rods in b16a2

Discussion in 'Engine Building' started by hondapowerb16a2, Mar 7, 2008.

  1. hondapowerb16a2

    hondapowerb16a2 New Member

    Messages:
    99
    Likes Received:
    1
    Joined:
    Sep 14, 2007
    my buddy has a b17 block sitting at his house and i am tearing down my b16 and i was thinking about throwing in the 1.7 rods and crank with my ctr pistons will this set up work with the ctr pistons and will it change my compression from when it was a 1.6 and will i have any clearance issues with the ctr pistons if i use the 1.7 stuff? also is it worth it?
     
  2. LS_VTEC

    LS_VTEC you get the BRAKE

    Messages:
    2,616
    Likes Received:
    25
    Joined:
    Dec 11, 2007
    Location:
    NJ
    I would personally build the 1.7L block. Bore it to a 1.8L and use the ctr's in that with machined gsr rods.
     
  3. hondapowerb16a2

    hondapowerb16a2 New Member

    Messages:
    99
    Likes Received:
    1
    Joined:
    Sep 14, 2007
    if i bore it to a 1.8 how would i use my ctr's they are standard bore?
     
Verification:
Draft saved Draft deleted

Share This Page