1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

b18 w/ p30 pistons..cam help

Discussion in 'Integra' started by competitiveaudioman, Aug 9, 2007.

  1. competitiveaudioman

    competitiveaudioman New Member

    Messages:
    230
    Likes Received:
    1
    Joined:
    Aug 18, 2006
    ive got a b18a engine im building up. so far ive got p30 pistons and a full rebuild in the bottom end with stock rods and crank. i was wondering what cam i should use for this set up. i can get a good deal on crower 404s but is that a good cam for this set up? im needed help asap
     
  2. welfare

    welfare Ancient Member

    Messages:
    1,120
    Likes Received:
    9
    Joined:
    Apr 19, 2004
    Location:
    New York
    I know the 403s clear, but Im not sure on the 404s, I believe it is one step above the 403, but the lift might be just a hair too high. Remember that you will need upgraded valve springs and retainers in order to use either the 403 or the 404
     
Verification:
Draft saved Draft deleted

Share This Page