1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

B18A and B18B

Discussion in 'HYBRID -> EG-EK / DC' started by 95hatchcx, Jan 20, 2004.

  1. 95hatchcx

    95hatchcx Member

    Messages:
    44
    Likes Received:
    0
    Joined:
    Sep 8, 2003
    I have a B18A and am going to buy a b18B.
    I am going to put the B18B in my 95 hatch CX
    Can i use the drive axles, motor mounts, and
    shift linkage from the B18A to put on the b18B
    or do i need all b18B parts?

    How many motor mounts will i need for the swap?
     
  2. breed

    breed Senior Member

    Messages:
    282
    Likes Received:
    0
    Joined:
    Oct 23, 2003
    Location:
    New York
    if you have a b18a and your going to a b18b the mounts should still work. I'm pretty sure integra's use the same mounts from 94-00 so they should work. the shift linkage also should be fine. the axles should also fit if the motors are the same years. is the b18a in your car now?
     
  3. 95hatchcx

    95hatchcx Member

    Messages:
    44
    Likes Received:
    0
    Joined:
    Sep 8, 2003
    I don't have the b18A currently in the car.
    The b18A is from a 91 integra, and the b18B
    is from a 95 integra.
     
  4. breed

    breed Senior Member

    Messages:
    282
    Likes Received:
    0
    Joined:
    Oct 23, 2003
    Location:
    New York
    if the b18b is a 95 you can use your civic rear mount I used mine when I did my type r swap. but you will need a tranny mount and a driver side engine mount from a 94-00 integra. the axles also need to be 94-00 integra axles.
     
  5. xj0hnx

    xj0hnx I wanna be sedated VIP

    Messages:
    14,172
    Likes Received:
    48
    Joined:
    Nov 10, 2002
    Location:
    C.C.TX.
    If you use the B18A axles, you HAVE to use the B18A halfsahft also. The joint is different on the 94+ tegs.
     
Verification:
Draft saved Draft deleted

Share This Page