1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

b18a to b16 swap help

Discussion in 'HYBRID -> ED-EF / DA' started by 89b18a1, Apr 7, 2006.

  1. 89b18a1

    89b18a1 Junior Member

    Messages:
    12
    Likes Received:
    0
    Joined:
    Jan 31, 2006
    whats up guys, i have a 89 civic dx hb that has a b18a1 in but spun rod bearing so after consideration i bought a b16a long block from hmotorsonline because the b18a already had a b16 tranny so my question is
    is it any thing else i need for this swap to go right i already bought the dizzy and pr3 ecu so is this plug and play except from wiring vtec also can somone tell me where the knock sensor is on this thing i have been looking and i think i am looking over it pics of it would be great thanks. P.S. LS/VTEC is coming
     
  2. ripperbone

    ripperbone angry bear

    Messages:
    3,173
    Likes Received:
    8
    Joined:
    Oct 20, 2004
    Location:
    Oklahoma
    should be on the back of the motor above the oil filter, and below the intake manifold

    your going to need to use the bracket just under the cam gears off the b18 that goes to from the motor mount to the block. the b16 should be different
     
Verification:
Draft saved Draft deleted

Share This Page