B18a1 Block Into 5th Gen Civic

[saturn_boy96]

i need to knjow what mounts and brackets i need to make this intall happen.

so far i figured out that none of the mounting brackets on a b18a1 block will work with a 5th gen civic's chasis, so do i need all the the mounts and brackets from a 94+ teg to make this stuff work?

 

[hooktupciv95]

Just go with the hasport kit. Kinda pricey though.

 

[ksrcivic]

U can buy the HAsport ones but theres no need unless u go racing full time with it, what you need is the tranny tourqe mount from a 94+ teg, the rear motor bracket from a 94+ teg, an A/C bracket/drivers side tourque mount from a 94-97 DOHC B16A del sol or 94+teg, and finally the drivers side bracket which u may use again if you have a 5th gen civic with a 2 stud drivers side motor bracket(some were 3 stud), otherwise you can use a 92-95 civic SI one. and thats it, this will drop in and ur set.

 

[phunky.buddha]

Here. I have no idea if this is correct, but you can use it all you want:

 

[saturn_boy96]

alright, thanks guys