1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

B18A1 OBD-0 into a '90 Standard CRX...help!!!

Discussion in 'ECU's, Electronics, and Tuning' started by '90ShowCRX, Feb 26, 2004.

  1. '90ShowCRX

    '90ShowCRX Junior Member

    Messages:
    27
    Likes Received:
    0
    Joined:
    Nov 10, 2003
    Location:
    Dillon, SC
    Ok guys, I really need some help here...

    Well, I have my B18A1 and I have a S80 tranny outta '94 Teg LS...i have my HCP Motor Mount Kit. I have my OBD0 B16A Dizzy from the JDM Xsi and I dunno what is up with it man. I mean I have heard that it will work with the B18A1 with the OBD0 issues, but it wont work with the wiring harness with my car...so what I am wondering here is if anyone has a wiring diagram for the JDM Dizzy or for my car? Any help would be apprecaited guys...

    Brandon

    P.S. ~ My HCP mount kit i have is for a Cable tranny setup, just wondering if it will work on my Hydro Tranny, and yes I do have the hasport cable for the Cable to Hydro deal... thanks yall
     
  2. '90ShowCRX

    '90ShowCRX Junior Member

    Messages:
    27
    Likes Received:
    0
    Joined:
    Nov 10, 2003
    Location:
    Dillon, SC
    Anyone??? :toot:
     
  3. radnulb

    radnulb Senior Member

    Messages:
    674
    Likes Received:
    1
    Joined:
    Sep 23, 2003
    Location:
    Sinsinnaty, Ohio
    get a cable tranny
    do a MPFI swap.
    done.
     
Verification:
Draft saved Draft deleted

Share This Page