B18b1 quick wiring help!!

We may earn a small commission from affiliate links and paid advertisements. Terms

R

runwitme

New Member


the reds are what i have wire up .. the blue just shows the pipe underneath the IM . im lost on the green as i dont know where it goes to

so i need help .. did i wire my reds right? .. and where does the green go to? .. quick help as im tryin to finish this by tonight .. its already 10 pm .. :D

thx in advance
 
I'm pretty sure the hose by the oil cap goes to the intake piping. The other parts i can't really tell what they're pointing to.
 
I would suggest a complete wiring harness (definitely less then $70 almost anywhere).....you just need to use the USDM wiring harness for your car (as it was stock) its always the best way. Or get an OBD1 B18B USDM harness (but its prob more expensive)

Worst case scenario is you extend a few wires but thats it.

Using tube connectors is risky and can lead to troubleshooting that no one wants to deal with when you don't know if its something with the drive-train or your wiring
 
My info is based on this being an EG (or 94-95 DC)

If its an EK (or 96-01 DC) then you need OBD2 harness
 
Oops...valve cover in picture says OBD2

Fill us in and you'll get some good feedback form someone
 
You must log in or register to reply here.
Back
Top