1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

B18C in a 2000 civic si ecu issue

Discussion in 'ECU's, Electronics, and Tuning' started by alleycat88, Feb 29, 2008.

  1. alleycat88

    alleycat88 New Member

    Messages:
    2
    Likes Received:
    0
    Joined:
    Feb 27, 2008
    Hey guys,
    I have a B18C swap in a 2000 civic si and it still has the stock ecu. I am wondering what ecu would be the best for me to put in it? It has the stock obd2 in it and I have heard it would be wise to change to a p72 obd1. Would that be something I should look into? Thanks for any help or suggestions.
     
  2. OKCZombie

    OKCZombie Banned

    Messages:
    124
    Likes Received:
    0
    Joined:
    Jan 10, 2008
    ok gsr or type r b18c? use the ecu for the motor - your car is obd2b you could jumper harness to an obd1 ecu but if you do why not get a chipped p28 to your setup
     
  3. jamesA

    jamesA Well known pissed off telephone guy VIP

    Messages:
    16,127
    Likes Received:
    1,020
    Joined:
    Aug 10, 2003
    because the p28 doesn't have controls for the butterfly valves a gsr uses, it'd be best to get an obd1 p72 and obd1 conversion harness.

    edit: if the b18c is obd2, get an obd2 ecu unless you plan on chipping it.
     
    Last edited: Mar 7, 2008
Verification:
Draft saved Draft deleted

Share This Page