1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

B18c1 With Type R

Discussion in 'Engine Building' started by Viperlocc_B18C1, Mar 17, 2003.

  1. Viperlocc_B18C1

    Viperlocc_B18C1 Senior Member

    Messages:
    115
    Likes Received:
    0
    Joined:
    Mar 3, 2003
    Location:
    Madison, WI
    Im thinking of putting in the Type R intake cam and the Type R pistons into my B18C1 How much would you all think i would get out of it. I know of someone here who has the Type R intake cam in his non-type r integra and he can keep up just fine with them in the quarter (runs 93 to 94mph). does anyone know of a place that would sell these?
     
  2. E_SolSi

    E_SolSi Member of the 20 nut club Moderator VIP

    Messages:
    30,036
    Likes Received:
    3,970
    Joined:
    Sep 28, 2002
    Location:
    CT
    im not 100% sure on this but i think putting ITR pistons in a GSR will lower the CR <_< :unsure:
    http://www.alljdm.com has the CTR cams (more agressine intake cam same exhaust cam) for $300
    check him out
     
  3. pissedoffsol

    pissedoffsol RETIRED

    Messages:
    49,693
    Likes Received:
    54
    Joined:
    Sep 28, 2002
    Location:
    Retirement Home
    stock gsr = 10.000817920435364
    gsr with usdm itr pistons = 10.836228641070214
    gsr with JDM itr pistons = 11.362493622638828
    gsr with JDM gsr pistons = 10.600843193019798
     
  4. Viperlocc_B18C1

    Viperlocc_B18C1 Senior Member

    Messages:
    115
    Likes Received:
    0
    Joined:
    Mar 3, 2003
    Location:
    Madison, WI
    im gonna get the civic type R pistons but should i get the integra type R cams? or the civic type R?
     
  5. pissedoffsol

    pissedoffsol RETIRED

    Messages:
    49,693
    Likes Received:
    54
    Joined:
    Sep 28, 2002
    Location:
    Retirement Home
    ctr pistsons in a gsr = 12.042422511586593

    thats pretty high, just know that

    the ctr and itr exhaust cams are indentical.
    the intake cam on the ctr is slightly more agressive
     
  6. Domeskilla

    Domeskilla Senior Member

    Messages:
    2,948
    Likes Received:
    0
    Joined:
    Oct 27, 2002
    Location:
    Fort Wayne, IN
    12.0 high? blah... Mike ran 12.6 on pump gas. :p Now that is high. :)
     
  7. 2 litre EG

    2 litre EG Senior Member

    Messages:
    1,103
    Likes Received:
    0
    Joined:
    Dec 8, 2002
    Location:
    so cali
    my buddy eddie runs 16:1 in his crx lol... although it is a full race car

    :D
     
  8. D See 2

    D See 2 Senior Member

    Messages:
    2,405
    Likes Received:
    0
    Joined:
    Sep 29, 2002
    Location:
    Baltimore, MD

    dayyyym. thats pretty fucking high y0!
     
  9. Viperlocc_B18C1

    Viperlocc_B18C1 Senior Member

    Messages:
    115
    Likes Received:
    0
    Joined:
    Mar 3, 2003
    Location:
    Madison, WI
    well im set on the CTR pistons but what about the cams..what would be the best for the intake? CTR or ITR?
     
  10. B16

    B16 Super Moderator VIP

    Messages:
    11,539
    Likes Received:
    534
    Joined:
    Sep 30, 2002
    Location:
    yay area, CA
    CTR, gives you 3 degrees more of intake duration over the ITR
     
  11. 2 litre EG

    2 litre EG Senior Member

    Messages:
    1,103
    Likes Received:
    0
    Joined:
    Dec 8, 2002
    Location:
    so cali
    yeah i would stick with some CTRs also
     
Verification:
Draft saved Draft deleted

Share This Page