1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

B18c4 GearBox Help

Discussion in 'HYBRID -> EG-EK / DC' started by toqeer1986, Sep 13, 2007.

  1. toqeer1986

    toqeer1986 New Member

    Messages:
    80
    Likes Received:
    0
    Joined:
    Aug 28, 2007
    hi since i am new to swaps i was going to try and fit a s20 gearbox 2 a b18c4 but i've been reading and its gotta be bseries can i swap it for a 1M gearbox or a gearbox out ov a 1997 2.2 Prelude the engine that i previously got was a d15z3 vtec E and the gearbox had an lsd on it but i used my s20 with that and mated it ? any ideas peepz :huh: (as you can see i am a lost sheep in swaps) LOLz
     
  2. 99sidude

    99sidude Moderator Moderator VIP

    Messages:
    3,707
    Likes Received:
    170
    Joined:
    May 1, 2006
    Location:
    Ohio
    :headsmash: It's really hard to get through your questions when you don't use punctuation. Anyways, you can only mount a B series trans to a B series engines. Likewise only a D series trans will bolt to D series. The exception is where people do an "H2B" swap, where a kit you buy mounts a B series trans on an H series motor.
     
  3. 1988hondacrxsiR1

    1988hondacrxsiR1 Banned

    Messages:
    230
    Likes Received:
    0
    Joined:
    Sep 10, 2007
    Location:
    Midwest
    99sidude is right
    b series engine = tranny mates
    d series engien = tranny mates

    to mix it will not fit ;)
     
Verification:
Draft saved Draft deleted

Share This Page