1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

b18c5 wiring

Discussion in 'HYBRID -> EG-EK / DC' started by clayj, Jul 21, 2003.

  1. clayj

    clayj Junior Member

    Messages:
    3
    Likes Received:
    0
    Joined:
    Jul 21, 2003
    I have a 94 vx hatch and im getting a b18c5 swap next week and trying to figure out all this wiring stuff before i get. Im pretty sure ill need an obd adapter for the itr ecu to work,but all this adding 4 o2 wires is confusing me. Could someone send me a diagram or website that shows it exactly and any other wires il have to add?Just trying to get it all layed before I start. If anyone has any pointers before I start my swap please feel free to share. Thanks clay
     
  2. rudeludenotmeanthough

    rudeludenotmeanthough Senior Member

    Messages:
    1,406
    Likes Received:
    0
    Joined:
    Sep 29, 2002
    ummm good luck!! :D
     
  3. darwins_vtech

    darwins_vtech Senior Member

    Messages:
    250
    Likes Received:
    0
    Joined:
    Jun 4, 2003
    Location:
    Wisconsin
    if you don't have a 4 wire O2 sensor then have fun wiring that! other than that . The ITR might have a knock sensor. it would be a single wire run from the above the oil filter. and plugs into the ECU. For other wiring questions, look over the electronics section of the site. DON"T POST TWICE THOUGH!

    Darin
     
Verification:
Draft saved Draft deleted

Share This Page