1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

b20 swap need help

Discussion in 'HYBRID -> EG-EK / DC' started by paulino966, Mar 24, 2010.

  1. paulino966

    paulino966 New Member

    Messages:
    1
    Likes Received:
    0
    Joined:
    Mar 24, 2010
    I got a 1998 honda civic si thinking to do a b20 swap,i need to know exactly what i need for parts to put this together.thanks let me know,i currently have a b20b from a crv non vtec i would like to run with a vtec head.Please list every parts needed.
     
  2. intenseneal

    intenseneal New Member

    Messages:
    257
    Likes Received:
    1
    Joined:
    Apr 10, 2009
    Ok first Honda did not make a Si in 98, only in 99-00 in the EK body. You will need the rear trans mount bracket and timing belt side bracket from a 99-00 Si. If you plan to use the B20 head you will need a B18b1 intake manifold. As for wiring I used a Dx/Lx harness. But why would you want to pull out a B16 for a B20 unless you are swaping over the Vtec head. If that is the case then you have everything you need but the Ls/CRV Vtec swap kit.
     
Verification:
Draft saved Draft deleted

Share This Page