Discussion in 'HYBRID -> EG-EK / DC' started by ajhan, Mar 21, 2010.
i have a 98 b20z2 block with a 95 ls b18 head. what dizzy's can i use?
Its a 94 civic coupe, the ecu is obd1, does this an I can use a distributor out of a d15?
no, you will need a 94-95 obd1 gsr distributor.
ok thanks. Will I need to change the plugs to accomodate that one?
dont use a gsr distributor because the bolts wont line up. if your using a LS head you need a obd1 LS distributor.
thanks guys, i also need to know what water pump to use?
as far as i know the car is on time but the car still won't start. it turns over but nothing happens. i have spark, fuel, and air
I assumed this was a vtec head....
what head are you using? b18 WHAT?
im not to sure, i just bought the car a couple days ago. how can i tell which one?
and no its none v-tec
sorry for all the questions
Use the dizzy that goes with the head you are using because you will run into bolt up problems with other dizzy's. All 3 bolt holes will not line up on some of them.^_^
b20b/z/b18b heads are basically the exact same thing. you will want to use a 94-95 integra ls/rs/gs (b18b1) style distributor
Or a 1992-1993 Integra dizzy since they are OBD1 too
Separate names with a comma.