1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Belts for my swap

Discussion in 'HYBRID -> EG-EK / DC' started by Killuminati, Nov 13, 2005.

  1. Killuminati

    Killuminati Junior Member

    Likes Received:
    Sep 12, 2005
    Ok I'm getting ready to put in my b18c5 but I need to replace the belts....all of them. Problem is I don't know exactly what I need. I have the timing belt but what other belts do i need to get (alternator belt, compressor belt etc). Anything else I should get while I'm out? I figured a new water pump but I can't think of anything else.
  2. brian11to1

    brian11to1 Senior Member

    Likes Received:
    Jan 9, 2003
    general rule of thumb

    replace: water pump, timing belt, tensioner, ac/alternator/ps belts, upper/lower hoses, heater core hoses, thermostat, valve cover gasket & spark plug grommets, as well as spark plugs, plug wires and dist. rotor and lastly the dist. cap.

    this is stuff that i replaced when i swapped my b20b into my integra. I havent had any problems with it since.
Draft saved Draft deleted

Share This Page