1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

brake booster

Discussion in 'Wheels / Suspension / Tires / Brakes' started by warpt123, Aug 29, 2003.

  1. warpt123

    warpt123 Junior Member

    Messages:
    7
    Likes Received:
    0
    Joined:
    Jan 11, 2003
    Has anyone here had to replace there brake booster and if so how hard was it to change. Do you recomend that it should be fixed by a shop. I have 90 civic hb
     
  2. E_SolSi

    E_SolSi Member of the 20 nut club Moderator VIP

    Messages:
    30,036
    Likes Received:
    3,970
    Joined:
    Sep 28, 2002
    Location:
    CT
    i changed mine .... its not TOO hard

    take off the master cyl
    go under the dash and disonnect the pin from the brake pedal (hardest part)
    4 bolts on the booster connecting it to the firewall
    might be a pretty tight squeeze getting it out

    then just put it back on
     
  3. BigJ

    BigJ I'm just about that action Boss. VIP

    Messages:
    11,091
    Likes Received:
    408
    Joined:
    Oct 4, 2002
    Location:
    Washington
    I have changed many on gm's but not a honda and it isn't too tough at all to change on a gm.

    I don't think it would be too tough at all, just remove the master cylinder, and a few bolts against the fire wall, and remove the bolt holding it to the brake pedal and you're home free. Well taht's how simple it was on a s10 blazer atleast.
     
Verification:
Draft saved Draft deleted

Share This Page