1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Brake Master cylinder upgrade

Discussion in 'Civic and del Sol - EG and EK' started by ITSWILL, Apr 8, 2012.


    ITSWILL Member

    Likes Received:
    Oct 24, 2009
    Ortonville, MI
    I swapped a set of 2000 Si front corners onto my 97 hatch this weekend. What are my options for a brake master cylinder that will bolt to my booster?

    I am looking for tight brake feel, I assume the 2000 Si master will fit, but how does it feel?

    I have heard an Integra MC might fit but would like to verify.

    Also I understand I can use ABS MC or non ABS MC, can someone confirm?
  2. bluejcivic

    bluejcivic New Member

    Likes Received:
    May 1, 2007
    you can either get a 15/16 mc from a 2000 si, 94-00 acura integra, or 90-91 prelude. google for fitment in your car. if your car is abs, get an abs mc, if not then dont bother. you can also get a 1" mc from an auto integra/ type r if your like but unless you upgrade to 11"+ brakes up front and disks in the back, i wouldn't bother. if you decide to get rear disks then you need a prop valve stamped 40/40 so you dont wear out your new back brakes in a month. good luck
Draft saved Draft deleted

Share This Page