1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Brakes clicking??

Discussion in 'Wheels / Suspension / Tires / Brakes' started by Jazzy19, Aug 28, 2003.

  1. Jazzy19

    Jazzy19 Senior Member

    Messages:
    132
    Likes Received:
    0
    Joined:
    Feb 3, 2003
    i have a 93 SI. I change rotors, pads, calipers and blead the brake lines. Everytime i shift into reverse and start to roll, then hit the brakes. I heard a clicking sound, like something is hitting against the rotor or the calipers??? I took everything off and checked but still cant find the problem... Could anyone help me please??
     
  2. E_SolSi

    E_SolSi Member of the 20 nut club Moderator VIP

    Messages:
    30,036
    Likes Received:
    3,970
    Joined:
    Sep 28, 2002
    Location:
    CT
    check all the little gay spring clips and shit ... make sure they are all in correctly
    then make sure everything is properly tightened

    sounds like something is loose or not lined up right
     
  3. Jazzy19

    Jazzy19 Senior Member

    Messages:
    132
    Likes Received:
    0
    Joined:
    Feb 3, 2003
    thanx ill try looking it over again!!!
     
  4. sportlinecrx

    sportlinecrx Banned

    Messages:
    6,020
    Likes Received:
    0
    Joined:
    Sep 28, 2002
    let me know what u find cause i have the same problem, except mine does it under light braking when going forward at very slow speed.
     
  5. pissedoffsol

    pissedoffsol RETIRED

    Messages:
    49,693
    Likes Received:
    54
    Joined:
    Sep 28, 2002
    Location:
    Retirement Home
    bend your dustshields out a little bit..... it might be rubbing slightly
     
  6. Wycked Sniper

    Wycked Sniper Senior Member

    Messages:
    201
    Likes Received:
    0
    Joined:
    May 13, 2003
    Location:
    East, TN
    I hear ya Sol. No matter how careful I am on Honda brakes, those dust sheilds always end up warped! I've found the easiest thing to do is let a friend roll the car slowly forward and back while I "adjust" the dust sheilds with a long handled screw driver. Seems to always work for me, just thought I'd see if it helped Jazzy out a bit. :D
     
Verification:
Draft saved Draft deleted

Share This Page