1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Brakes

Discussion in 'HYBRID -> ED-EF / DA' started by broughdogg, Feb 28, 2005.

  1. broughdogg

    broughdogg Junior Member

    Messages:
    2
    Likes Received:
    0
    Joined:
    Feb 28, 2005
    i have a 90 civ si with a obdo ls conversion. I swaped the motor and brakes dont work. new master cylinder And can i get a Tegi 15/16 Master
     
  2. phunky.buddha

    phunky.buddha Admin with a big stick Admin VIP

    Messages:
    28,465
    Likes Received:
    228
    Joined:
    Sep 30, 2002
    Location:
    Dallas / Fort Worth, TX
    Yeah, you can use that master if you swap the booster too. I'll bet some of your vacuum lines aren't connected properly, and the booster isn't working.
     
  3. broughdogg

    broughdogg Junior Member

    Messages:
    2
    Likes Received:
    0
    Joined:
    Feb 28, 2005
    How do i get booster out alota work
    Is there a vacuum diagram i can look at
    I never took any brake lines off and when you pump them thek stick but when you drive they go to the floor
     
  4. phunky.buddha

    phunky.buddha Admin with a big stick Admin VIP

    Messages:
    28,465
    Likes Received:
    228
    Joined:
    Sep 30, 2002
    Location:
    Dallas / Fort Worth, TX
    You have to go under the dash to get the booster out.

    You had to have removed some of the brake vacuum lines to swap the engine. I don't have a vacuum diagram online- that's what factory service manuals are for. Search.
     
Verification:
Draft saved Draft deleted

Share This Page