1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Broken vaccum fitting

Discussion in 'General Tech and Maintenance' started by C-Bye, Oct 3, 2005.

  1. C-Bye

    C-Bye Member

    Messages:
    46
    Likes Received:
    0
    Joined:
    Jul 16, 2005
    Location:
    Minnesota
    The vaccum line directly above the intake on the tb is broken. Is this a problem. I tried an ez out, broke inside, it is plugged up really good now. is this going to cause problems?
     
  2. VTECPOWER

    VTECPOWER Senior Member

    Messages:
    1,683
    Likes Received:
    0
    Joined:
    Oct 6, 2003
    Location:
    Winchester, VA
    Um shouldnt you put the vacuum line in there?
    Go to autozone, but a fitting and put it in there, wrong vacuum lines = horrible gas mileage.
     
  3. C-Bye

    C-Bye Member

    Messages:
    46
    Likes Received:
    0
    Joined:
    Jul 16, 2005
    Location:
    Minnesota
    There are two vacuum line fittings one is offset towards the front of the tb then one dirrectly on top. the one on top? I was told it goes to the charcoal canister? Can it be plugged?

    I tried to take it out with an ez out, it broke inside, thought about drilling but metal shavings don't sound good in the intake, replace the throttlebody? It came broke when I bought it, call them? If it is an ez fix I don't want to go through that B.S.
     
Verification:
Draft saved Draft deleted

Share This Page