1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

bushings on 94 LS integra

Discussion in 'Integra' started by BigWhiteb18, Feb 27, 2009.

  1. BigWhiteb18

    BigWhiteb18 New Member

    Messages:
    6
    Likes Received:
    0
    Joined:
    Feb 26, 2009
    Location:
    Seattle
  2. BrutalB83

    BrutalB83 Brutal Moderator Moderator VIP

    Messages:
    11,620
    Likes Received:
    302
    Joined:
    Jun 24, 2006
    Location:
    Rochester Hills, MI
    Some of those may need to be pressed in...
     
  3. drbelanger73

    drbelanger73 Beer is good for you.

    Messages:
    486
    Likes Received:
    7
    Joined:
    Dec 15, 2007
    Location:
    Bath, ME
    I considered such things myself. Not really against it; it just isnt in the order of priority at this moment. Looks like a lot of work. If I ever get deep into my suspension maybe I'll consider it. Some peeps at work swear by them though.
     
  4. dc4dude

    dc4dude Member

    Messages:
    904
    Likes Received:
    17
    Joined:
    Aug 12, 2008
    Location:
    chicago, il
    there are a few ways to do this. if you have access to a decent press, then the only real work you have to do is dissassembly/reassembly. if you are like me, and you don't have access to one, you blowtorch the rubber in the bushings, twist them out with a vise, and grind out the metal part with a die grinder or a sawzall. installation of the new bushing is self explanatory.
     
  5. 91_stylin_civic

    91_stylin_civic Member

    Messages:
    349
    Likes Received:
    5
    Joined:
    Oct 17, 2008
    Location:
    New Jersey
    installed an energy suspension kit on my hatch it was a lot of work but i think it was worth it. the control arms were the only thing that gave me problems
     
Verification:
Draft saved Draft deleted

Share This Page