1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Cam Angles sensor

Discussion in 'HYBRID -> ED-EF / DA' started by NoNeed4VTEC, Aug 15, 2003.

  1. NoNeed4VTEC

    NoNeed4VTEC Member

    Messages:
    35
    Likes Received:
    0
    Joined:
    Jul 29, 2003
    I'm putting a 95 ZC in my 90 Civic. I think I v'e got it down. 89 dist. from an Integra. My 1995 ZC does not have a cam angle sensor but I think I can use one form an 89 integra. But I have a few qusetions. I don't know what to do about the MAP sensor. On my car it's on the firewall and on my engine it's on the TB. I was thinking swap the T.B or intake manifold. I'm also doing the dual-point injection to multi-point conversion. Is there some way to get the wires from out of the ECU conector? I have to run a wire in from another place but it has no where to connect it.

    Oops, sorry about the title.
     
  2. NoNeed4VTEC

    NoNeed4VTEC Member

    Messages:
    35
    Likes Received:
    0
    Joined:
    Jul 29, 2003
    Does any one know what to do about the MAP sensor?
     
Verification:
Draft saved Draft deleted

Share This Page