Car stuck in limp mode

We may earn a small commission from affiliate links and paid advertisements. Terms

Takoda

New Member
I have a 97 ek coupe with a jdm b16a tuned on hondata s300 car at first would hit vtec but when I hit a bump or banged into gear it would cut out now car will be fine for a sec then run like shit and won't let me go pass my 2 step at 3800 no check engine light or anything like that help please
 
Id.............................. check wiring at the ecu where its been modified , and if its a stockish b16 just with bolt ons put a stock ecu back in it you are just wearing the motor out revving it to the moon and lowering vtec crossover
 
Last edited:
Seems like a wiring issue. wires improperly connected is my guess....like a short in the system.
 
Seems like a wiring issue. wires improperly connected is my guess....like a short in the system.
I was thinking something was grounding out or my jumper harness was going out
 
I was thinking something was grounding out or my jumper harness was going out
Id start there, welcome to hondaswap, post us up a thread of your car with pictures ! Also it is a EJ6 we never had a "EK" in the states just throwing that out there
 
Back
Top