1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Cast Stainless Merge Collectors - Make your own turbo manifold.

Discussion in 'Forced Induction' started by Z10 Motorsports, Jan 28, 2008.

  1. Z10 Motorsports

    Z10 Motorsports New Member

    Messages:
    17
    Likes Received:
    0
    Joined:
    Jan 17, 2008
    [​IMG]

    Hello all!

    We have just completed our 3D Modeled CAST 304 Stainless merge collectors. Since they are CAST there are no welds. These are available in T3 or T4 bolt patterns, and are 1½ Schedule 40 compatible.

    Start making your own turbo manifolds. Take the hardest part out of the equation. This pre-made collector will fit 1½ schedule 40 bends and allow you to be weld them together.

    HondaSwap.com Special 119.99

    Full Specs 2 Versions T3 or T4 ( Please pick correct version on site. )


    • T3 or T4 Bolt Pattern ( or both )
    • 3D Solid Modeled & Completely Cast 304 Stainless ( no welds )
    • 1½ Schedule 40 compatible
    • 3/8th Thick flange
    • Reinforcing ribs between each runner
    • Capable of holding 60+ PSI
    • Universal Application - Can be used to make a manifold for any car.


    To order simply click the link below and be sure to enter the coupon code upon checkout.
    This will bring it down to 119.99

    Click to Place Order!

    Coupon Code - 03a9c6

    [​IMG]

    [​IMG]

    [​IMG]

    Deal ends 2/29/08

    If you have any questions feel free to ask.
     
  2. Z10 Motorsports

    Z10 Motorsports New Member

    Messages:
    17
    Likes Received:
    0
    Joined:
    Jan 17, 2008
    Ttt
     
  3. Z10 Motorsports

    Z10 Motorsports New Member

    Messages:
    17
    Likes Received:
    0
    Joined:
    Jan 17, 2008
  4. Briansol

    Briansol Admins Admin VIP

    Messages:
    21,448
    Likes Received:
    2,110
    Joined:
    Nov 18, 2007
    Location:
    CT
    nice looking pieces, for sure!

    if only i could weld
     
  5. TurboMirage

    TurboMirage YEEAAAHHH VIP

    Messages:
    24,577
    Likes Received:
    696
    Joined:
    May 20, 2003
    Location:
    Central, MA
    what do i gotta do to get a freakin manifold flange outta you guys? :)
     
Verification:
Draft saved Draft deleted

Share This Page