CEL Codes

[Teal_HB]

Hey sort of a rookie here to wiring, so I thought I would see if anyone could help me with what I should do with these codes. First here is the story I have a swapped D16Y8 in my 94 hatch. I was running a P05 stock ECU so I bought a P28 to run my vtec. I have only wired a few things like me tach and all of my vtec wires just don't know what to do now. The codes I got when I used my CEL jumper are 14 and 41. I looked what they are up but i have no idea where to start. Some or any help would be nice, thank you very much.

 

[AllMotorMonster]

My best suggestion is for you to go buy the Helm's manual for your car. Not chiltons, or haynes, but Helm's.

This will give you all the information you will ever need to repair your car in detail.

www.helminc.com

They run about $60, but an investment well worth the money.

 

[Teal_HB]

Originally posted by AllMotorMonster@Oct 10 2004, 12:02 PM
My best suggestion is for you to go buy the Helm's manual for your car. Not chiltons, or haynes, but Helm's.

This will give you all the information you will ever need to repair your car in detail.

www.helminc.com

They run about $60, but an investment well worth the money.

[post=400840]Quoted post[/post]​

Which one should I get the genral one or the one on wiring?

 

[posol]

service manual is the one you want.

but ecu error codes are in our reference forum in the articles category, 3rd from the top

https://hondaswap.com/forums/index.php?showtopic=29806

you should have a look at all our refernce stuff first.