I have a B16A(hydro) in a 93 hatch and a week ago it became very hard to shift. I push the clutch in and if feels like its not. I had someone else push the clutch so could see if the fork moved and seems to go all the way. I took the clutch out and looked at it and it was fine but still does the same thing. Could something broke in the tranny would cause it to do this or could it be the clutch master cylinder? Thanks
Civic Not Shifting!?!
- Thread starter mr 93cx
- Start date
- Replies 4
- Views 883
We may earn a small commission from affiliate links and paid advertisements. Terms
EG3DIGITHATCH
Junior Member
can you shift the car while the car isnt running?
you might want to check the condition of the thow out bearing and fork.
broken or leaking hydrolics would cause the same deal except that the thow out bearing fork would not move or move all the way.
you might want to check the condition of the thow out bearing and fork.
broken or leaking hydrolics would cause the same deal except that the thow out bearing fork would not move or move all the way.
alloveryou
Junior Member
Check the setting on the hydraulic slave. I am running an exedy racing clutch and had to adjust accordingly when I switched.