1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Compression for this setup?

Discussion in 'General Tech and Maintenance' started by mozzandherb, Nov 29, 2005.

  1. mozzandherb

    mozzandherb Senior Member

    Messages:
    305
    Likes Received:
    0
    Joined:
    Jun 21, 2005
    I'm really hoping to go with this setup next year, I'm planning ahead, and was wondering if anyone might know what compression I should be going with. Right now I have an H22 with 10.6.1 compression. Here's the setup.

    Turnonetics T04/T3 turbocharger
    Tial Wastegate
    Spearco Intercooler
    Blitz dual drive BOV
    T4e 60 Trim

    Also I'm not sure what PSI I will be running, but I am planninng on building the motor.
     
  2. reikoshea

    reikoshea HS Troll...And Mod Moderator VIP

    Messages:
    12,633
    Likes Received:
    193
    Joined:
    Apr 27, 2005
    Location:
    San Antonio, TX
    9.0-9.5:1 would be your best bet if you go over 8 psi

    we sell the pistons rods and do the bottom end work if you need it...you will need to sleeve your block if you put in a forged piston.

    http://www.hondaswap.com/forums/index.php?showtopic=63773
     
Verification:
Draft saved Draft deleted

Share This Page