1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

couple-o-questions

Discussion in 'Engine Building' started by brian11to1, Oct 22, 2003.

  1. brian11to1

    brian11to1 Senior Member

    Messages:
    9,203
    Likes Received:
    21
    Joined:
    Jan 9, 2003
    which rods, rod bearing, and main bearing does i use when rebuilding a B18A? It seams as though I have a rod knocking that sucks... so i need to rebuild the engine... does anyone have a set of b18a rods they dont need anymore?
     
  2. brian11to1

    brian11to1 Senior Member

    Messages:
    9,203
    Likes Received:
    21
    Joined:
    Jan 9, 2003
    bump
     
  3. saturn_boy96

    saturn_boy96 88 C1V1C 53D4N DR1V3R

    Messages:
    1,507
    Likes Received:
    1
    Joined:
    Dec 13, 2002
    Location:
    Sheridan, WY
    befroe you start ordering all new parts, tear that block down and see if you spun a bearing. if you did check to see if it was a main bering or a rod bearing. if it was a main bearing, ditch the block, if it was a rod bearing, ditch the crank.
     
  4. brian11to1

    brian11to1 Senior Member

    Messages:
    9,203
    Likes Received:
    21
    Joined:
    Jan 9, 2003
    cant the crank be reground or whatever its called... it just knocks slightly though... but the timing belt is terribly loose could that cause a slight knock?
     
  5. saturn_boy96

    saturn_boy96 88 C1V1C 53D4N DR1V3R

    Messages:
    1,507
    Likes Received:
    1
    Joined:
    Dec 13, 2002
    Location:
    Sheridan, WY
    get a new timing belt, relash your vavles, and see if the knock goaes away.

    but if the knock is really loud. i think its rod knock.
     
Verification:
Draft saved Draft deleted

Share This Page