Cutting.......Cutting.....cutting.....

[Airjockie]

I think there was a workbench somewhere in the basement.....

Ahhh there it is......

Before I can use it...I got to clean it up a little...

Grimy.....the Purple power cleaner is not doing the job good enough...and I'm too tired to sand.... So I'll paint the top and call it a day....eww...hunter green????!?!?


screw Dat!!!!

So I guess I'll build a new counter top for it, and a tool peg board on the wall...

Hrmm....I'm going to need wood...and panels and other needless crap to fill up the basement with....

Got the wood....

And the panels and crap...

Got it...now that's a lot of wood...I better get cutting....

This is going to take a while....

Hello Carpitunnel.......

Maybe something in that box will cut faster.....

Nope...it cuts slowwer than that damn saw...

WTF MATE?!?!?!?

Ohh Snap!

What else was in that box....

Plastic...

Shiny

I think we have liftoff.....

WARNING...the next few pictures are GRAPHIC!!!!!

Whimpy girly saw meet the Saw-minator.......

Bye Bye!!!!!!

 

[phunky.buddha]

Pictures load sloooooooowwwwwwww.....

 

[CivicDisturbance]

 

[BodyDroppedNikes]

SHIT thats ALOT of beer!!

 

[StealthMode]

Oh my GOD!!! What happened to your hand??? LOL

 

[reckedracing]

werd, someone loves corona and bob villa
lol

 

[Airjockie]

Between posting, Chatting, drinking a few, and trying to find the right tools in this mess....an hour later...voila'.....

Stage 1 in tool organization....

 

[cxjon]

beer

 

[Celerity]

So what's that.. an hour to put up peg board.. And you'll FILL it in 14 seconds.

-> Steve

It's nice to see you still have a sense of humor.. Or, that you've lost your mind. Either way .. Compai !

 

[JDMPlaya]

Damn I've never waited that long for pics to load, lol

nice uhh peg board

 

[tab]

Chop saws and pegboard kick ass. congrats

 

[YouKnowWhoIBee]

Pegboards do kick ass... a+

 

[BigJ]

My Commercial Grade Makita 12" Slide Arm Chop Saw kicks your 10" Ryobi's ass


jp.


Nice setup, I have yet to set up a peg board in my garage that looks very much like yours.

 

[Airjockie]

When I get to doing the garage...it will be half peg boards

as for the basement...the rest of that wall will be pegboards.....


This is only the beginning...

 

[jamesA]

2 hours later the pics finally load...

Nice table saw.

Do you recycle those beer bottles? I'm sure YOU could make a pretty penny off them. lol

 

[posol]

clayton + beer =


clayton - beer = cannot compute #!Div0

 

[Airjockie]

in about another hour.....I'll give an update....


been busy today...and got a lot done....

 

[Seany-izzle]

the only good beer i saw in ther was the sammy a. lol. nice pics of you cutting yoru hand off!

 

[reckedracing]

Nice table saw.

table saw?

 

[Airjockie]

A little busy today....and stage two is complete.......


When we left off....... it still looked like this...

A little bit of stripping the old counter top off, smearing down a lot of clear silicon, and laying down a new counter top, and then tacking them down with some brads...and then painted a 2X4 and fastening it on the rear of the counter, then a strip of moulding for the back, and I re-used the rear moulding, painted it, and attached it to the front of the counter....then to move on to the wall....a little more paint...and cleaning up about 30 years of cob-webs....then on to the next project...the other peg board.... and this one I built a shelf on it....when I opened the box for the peg's...I had a little surprize...it was taped closed like it was open before.......and it didn't have the cheap plastic containers..but it had two FULL set's of pegs...so I got three peg sets for the price of 2 .....

So after a little clean-up...I'm happy.. B)

Here's the galllery for stage 2.....of the basement tool wall....

here..and don't forget page 3...


and the money shots...


before..

and after....