1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

d16 N/A build

Discussion in 'HYBRID -> ED-EF / DA' started by 69crx69, Jan 24, 2005.

  1. 69crx69

    69crx69 Member

    Messages:
    79
    Likes Received:
    0
    Joined:
    Aug 26, 2004
    Location:
    Wa
    I wanted to know if anyone has done a all motor d16. I was thinking about something along the lines of a d16a6 block, z6 head, and zc pistons. The head was is going to be built (I.E. valves, springs, titanium retainers, comp cam, P&P, and 3 angle valve job.) trying to do a high compression thing. Tell me if i am going in the right direction.
     
  2. phunky.buddha

    phunky.buddha Admin with a big stick Admin VIP

    Messages:
    28,465
    Likes Received:
    228
    Joined:
    Sep 30, 2002
    Location:
    Dallas / Fort Worth, TX
    Yup. There are a good number of people that have done it. I was going to build up the SOHC ZC in my CRX the same way- ZC pistons, Z6 head, big Crower cam etc. I was going for about 165whp, which would have made a fairly quick setup in that light of a chassis. You're definitely going in the right direction. Read a bit more on the site and you'll find lots of information written by me and a few other people about all motor D setups.
     
  3. ryan89crx

    ryan89crx Senior Member

    Messages:
    154
    Likes Received:
    1
    Joined:
    Oct 7, 2003
    Location:
    Washington State
    thats a good start for a n/a build. suggestion would be to make sure its tuned very well to make the most power. maybe a p28 ecu and uberdata.
     
Verification:
Draft saved Draft deleted

Share This Page