d16a6 into a 94 Civic Dx

We may earn a small commission from affiliate links and paid advertisements. Terms

RcRacing72

Junior Member
I can't really find much on this swap.
This would be bolting up to a 92-95 ex/si tranny.

I'm asking what will I have to do to make this swap work.

thx.

also when your looking at the gearing specs for a tranny, higher the number shorter the gear right?
 
Last edited:
just drop it in and bolt it up and off you go, need a lttle more info but d sereis to d series swaps are very straight forward
 
well you got to plug it in before you go that will help out. It prob wont run if you just bolt it in. (jk)
 
haha yeah its a d16a6. Im going no vtec. .020 bore, p29 pistons. light weight flywheel and clutch. Maybe light weight crank. z6/y8 intake. with 94+ integra dual outlet exhaust manifold.

The harness is already ran for mpfi, so I figured it should work,
I'm wondering about the distributors though. can I run the 1.5 dx distributor?
 
good luck getting that integra dual outlet exhaust manifold to bolt up to a d-series
 
Back
Top