1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

D16Y8 swap with B16A engine HELP

Discussion in 'Civic and del Sol - EG and EK' started by joshm2002, Dec 5, 2007.

  1. joshm2002

    joshm2002 New Member

    Messages:
    2
    Likes Received:
    0
    Joined:
    Dec 5, 2007
    Hi,

    Its my first time posting and not sure if I've already posted this or not, but yeh. I'm currently running a 1.6 sr sohc vtect engine in a 96 civic coupe, but I'm planning to drop a B16A engine in there. I was just wondering if theres anything that I might need other than a wiring loom and an ECU? I've had a straight through exhaust system fitted and a new induction kit, and I realise I'll probably have to replace the manifolds and induction kit, but will the transmission fit?

    Also its coming off a 1995 civic coupe so its a different generation civic, will I need different engine mounts?
     
  2. infintysquared

    infintysquared Junior Member

    Messages:
    4
    Likes Received:
    0
    Joined:
    Aug 4, 2006
    Location:
    Port St. John, Florida
    No, the transmission will not fit. You will need to get another one.
     
  3. Hostilescivic

    Hostilescivic New Member

    Messages:
    2
    Likes Received:
    0
    Joined:
    Dec 9, 2007
    Mounts will not fit. Get the D to B series mounts. Hasports or innovative mounts
     
  4. BrutalB83

    BrutalB83 Brutal Moderator Moderator VIP

    Messages:
    11,620
    Likes Received:
    302
    Joined:
    Jun 24, 2006
    Location:
    Rochester Hills, MI
    That's not exactly true. A B-series can be bolted into an EK using stock mounts. You can replace them with aftermarket pieces if you want, but it's not 100% necessary.
     
Verification:
Draft saved Draft deleted

Share This Page