1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

d16z6 in 89 hf... problems.

Discussion in 'HYBRID -> ED-EF / DA' started by racapozzi, Jul 21, 2006.

  1. racapozzi

    racapozzi Junior Member

    Messages:
    33
    Likes Received:
    0
    Joined:
    Mar 26, 2006
    I've Installed the new engine connected everything up and had been waiting on my new(obd1) dizzy and ecu(p28) for what seemed like ages. My package arrived and to my surprise I found a obd1 dizzy and a pm6 ecu from a 88-91 civic/crx. Now I had the conversion harness from rywire in advance and had already hooked this up and had waited on what I thought were the parts needed to finish this swap. Am I correct in saying the pm6 ecu will not work on a d16z6 engine? Thanks in advance.

    Tony
     
  2. Andrew

    Andrew Well-Known Member

    Messages:
    2,685
    Likes Received:
    26
    Joined:
    Mar 2, 2006
    Location:
    Tallahassee, FL
    My friend ran a pm6 on his, but since it's not a vtec ecu, vtec will not turn on, and I'm sure other things wouldnt work properly.

    But if you do use the pm6(temporarily), you've gotta make sure you have the obd-0 distributor plugged up too. It will run.

    -Andrew
     
Verification:
Draft saved Draft deleted

Share This Page