1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

d16z9 ecu info

Discussion in 'ECU's, Electronics, and Tuning' started by Titus, Feb 23, 2007.

  1. Titus

    Titus New Member

    Messages:
    14
    Likes Received:
    0
    Joined:
    Feb 10, 2007
    I finaly both a d16z9engine to swap with my tyni d15b2!first i was trying to be modest and i was just looking for a mpfi kit but i found a d16z9 in a junkiard the only but is that the ecu is not atached in the engine,in the junkiard they have a lot of ecu's but i don't know how to distinguish them..i don't even know which one came stock?can i have some benefits using some one of the ecu's that can run my allmost new engine?
    sorry about these so many questions but if i don't ask those who know i'll never know!:(
    5gears manual.
    HONDA RULES!:D
     
  2. CRX-YEM

    CRX-YEM Super Moderator Moderator VIP

    Messages:
    4,623
    Likes Received:
    54
    Joined:
    Sep 29, 2002
    Location:
    Wallingford, CT
    you sure you're not after a d16z6, which would have a used a p28
     
  3. Titus

    Titus New Member

    Messages:
    14
    Likes Received:
    0
    Joined:
    Feb 10, 2007
    d16z9 its the same as d16z6 but the european version!thats the only ecu that runs it!can i use temporali use my distribuidor wen iam looking for the real one?
     
  4. nofuturefilmer

    nofuturefilmer New Member

    Messages:
    1
    Likes Received:
    0
    Joined:
    Sep 4, 2006
    if the wiring is the same you might get lucky and you might be able to use that dizzy but i wouldnt recommend doing it use the dizzy that was designed for that motor other wise you could end up with problems
     
Verification:
Draft saved Draft deleted

Share This Page