1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Dead clutch

Discussion in 'Integra' started by hondaguy1000, Aug 10, 2011.

  1. hondaguy1000

    hondaguy1000 New Member

    Messages:
    1
    Likes Received:
    0
    Joined:
    Aug 10, 2011
    I have replaced the master and slave cylinder, bleed the line and still no pressure at all from the clutch pedal. If it's up and you bump it it will spring to the floor and vice versa. It will not build pressure at all even with bleeder closed and pumping it up to 50 times.. still nothing. I'm about at my wits end with this one anyone have any ideas??
     
  2. E_SolSi

    E_SolSi Member of the 20 nut club Moderator VIP

    Messages:
    30,036
    Likes Received:
    3,970
    Joined:
    Sep 28, 2002
    Location:
    CT
    broken throw out arm
     
  3. BIGROB90

    BIGROB90 New Member

    Messages:
    36
    Likes Received:
    0
    Joined:
    Aug 9, 2011
    Location:
    FLORIDA
    could be a faulty slave or master when i worked at honda we would see cases of those come in mostly if they were aftermarket and rarely oem. but if not that might be throughout bearing if you had noises before..
     
Verification:
Draft saved Draft deleted

Share This Page