1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

disc conversion correct parts

Discussion in 'Civic and del Sol - EG and EK' started by vtec82monster, Aug 12, 2013.

  1. vtec82monster

    vtec82monster New Member

    Messages:
    5
    Likes Received:
    0
    Joined:
    Aug 7, 2013
    ok so i have a eg8 and just going to do my rear disc conversion i just want to make sure these fit, the doner car is a 1994 b18b integra non abs im about to order the rear trailing arms (complete) hand brake cables and master cylinder (he had no prop valve)
    should i get the booster? are they the same anyway??
    all help appriciated
     
  2. phunky.buddha

    phunky.buddha Admin with a big stick Admin VIP

    Messages:
    28,465
    Likes Received:
    228
    Joined:
    Sep 30, 2002
    Location:
    Dallas / Fort Worth, TX
    From what I remember... you'll have to get the booster. I pulled my master from an Integra, and the ears from the master cylinder were reversed on the Integra compared to my 95 Civic sedan. It won't bolt up to the Civic booster. The booster bolts are a pain to get to also- they're up above and behind the pedals on the firewall.
     
  3. vtec82monster

    vtec82monster New Member

    Messages:
    5
    Likes Received:
    0
    Joined:
    Aug 7, 2013
    cheers for that, the car has no dash so should make things a little easier
     
  4. phunky.buddha

    phunky.buddha Admin with a big stick Admin VIP

    Messages:
    28,465
    Likes Received:
    228
    Joined:
    Sep 30, 2002
    Location:
    Dallas / Fort Worth, TX
    There you go, much easier to get to. :)
     
Verification:
Draft saved Draft deleted

Share This Page