1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

distributer for a dohc zc?

Discussion in 'ECU's, Electronics, and Tuning' started by metlmadman, May 29, 2007.

  1. metlmadman

    metlmadman noob member

    Messages:
    12
    Likes Received:
    0
    Joined:
    Mar 20, 2007
    Location:
    so cal
    Hi, I'm about to drop a dohc zc into a 89 rex dx. My question is:

    Do I use the ZC distributer and the exhaust cam position sensor? or Do I use the USDM D16a?

    My understanding is that if I run the USDM D16a dizzy, it has the position sensor integrated and I wont need to run the exhaust cam sensor and I could get/make a cam plug for the end.

    Recommendations?

    -Thanks
     
  2. jlicrx

    jlicrx Senior Member

    Messages:
    1,891
    Likes Received:
    65
    Joined:
    Jun 5, 2003
    Location:
    Colorado Springs
    JDM OBD0 DOHC ZC and USDM D16A1 both use the exact same distributor and Cylinder sensor - the OBD1 DOHC ZC has the Cylinder sensor in the distributor
     
  3. metlmadman

    metlmadman noob member

    Messages:
    12
    Likes Received:
    0
    Joined:
    Mar 20, 2007
    Location:
    so cal
Verification:
Draft saved Draft deleted

Share This Page